ErrorMessage: CLASS ZSAPLINK DEFINITION LOAD statement is missing
Hello.
I have start the ZSAPLINK_INSTALLER and installed the
"SAPlink_Daily.nugg" Rev. 396 successfully in our SAP ECC 6.0 - system.
At activation there where errors.
I think, it is a sequence-problem, so i activated with errors.
Then i load the "SAPlink_Daily.nugg" Rev. 396 once more with "overwriting".
Then i activated successfully.
Then i start the report ZSAPLINK and became a errormessage.
--------
Direct access to components of the global class ZSAPLINK is not
possible. CLASS ZSAPLINK DEFINITION LOAD statement is missing.
missing).
--------
I attached a .jpg-picture with the errormassage.
Can you help me?
Greetings Juergen
I have start the ZSAPLINK_INSTALLER and installed the
"SAPlink_Daily.nugg" Rev. 396 successfully in our SAP ECC 6.0 - system.
At activation there where errors.
I think, it is a sequence-problem, so i activated with errors.
Then i load the "SAPlink_Daily.nugg" Rev. 396 once more with "overwriting".
Then i activated successfully.
Then i start the report ZSAPLINK and became a errormessage.
--------
Direct access to components of the global class ZSAPLINK is not
possible. CLASS ZSAPLINK DEFINITION LOAD statement is missing.
missing).
--------
I attached a .jpg-picture with the errormassage.
Can you help me?
Greetings Juergen
Leave a comment
on 2015-03-16 10:32 *
By gregor.wolf
Hi Juergen,
can you please provide us the version details of you ABA and BASIS component?
Best regards
Gregor
can you please provide us the version details of you ABA and BASIS component?
Best regards
Gregor
Hello Gregor.
I hope, you mean this:
SAP_BASIS 700 0028 SAPKB70028 SAP Basis Component
SAP_ABA 700 0028 SAPKA70028 Cross-Application Component
PI_BASIS 2006_1_700 0018 SAPKIPYM18 Basis Plug-In (PI_BASIS) 2006_1_700
ST-PI 2008_1_700 0007 SAPKITLRD7 SAP Solution Tools Plug-In
SAP_BW 700 0030 SAPKW70030 SAP NetWeaver BI 7.0
SAP_AP 700 0029 SAPKNA7029 SAP Application Platform
SAP_APPL 600 0023 SAPKH60023 Logistics and Accounting
Greetings
Juergen
I hope, you mean this:
SAP_BASIS 700 0028 SAPKB70028 SAP Basis Component
SAP_ABA 700 0028 SAPKA70028 Cross-Application Component
PI_BASIS 2006_1_700 0018 SAPKIPYM18 Basis Plug-In (PI_BASIS) 2006_1_700
ST-PI 2008_1_700 0007 SAPKITLRD7 SAP Solution Tools Plug-In
SAP_BW 700 0030 SAPKW70030 SAP NetWeaver BI 7.0
SAP_AP 700 0029 SAPKNA7029 SAP Application Platform
SAP_APPL 600 0023 SAPKH60023 Logistics and Accounting
Greetings
Juergen
on 2015-03-17 13:16 *
By Stefan Schmöcker
Hello Juergen,
I added the lines that are causing your problem. But they work fine on a 7.4 system thus I cannot reproduce it.
Could you please add the proposal of the errormessage right after the program statement and tell us if this will solve the problem. Then I'd recreate the installation objects with this line added since it will do no harm in further releases but solve your problem
The code should look like this then:
REPORT zsaplink.
CLASS ZSAPLINK DEFINITION LOAD.
I added the lines that are causing your problem. But they work fine on a 7.4 system thus I cannot reproduce it.
Could you please add the proposal of the errormessage right after the program statement and tell us if this will solve the problem. Then I'd recreate the installation objects with this line added since it will do no harm in further releases but solve your problem
The code should look like this then:
REPORT zsaplink.
CLASS ZSAPLINK DEFINITION LOAD.
Hello Gregor and Stefan.
Thank you for your answer.
If i had the errormessage, i tested the statement
CLASS ZSAPLINK DEFINITION LOAD.
And i became another errormessage.
At your answer, i testet the statement once more and
i have no errormessage today.
So i install the SAPlink-plugins_Daily.nugg
with the program zsaplink and NOT with the zsaplink_installer.
It was not a good idea, i think.
There where errors.
At least i install the SAPlink-plugins_Daily.nugg
with the zsaplink_installer. There where errors too.
The result is a errormessage:
-----------------
The current ABAP program "ZSAPLINK======================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"ZSAPLINK_ENH_IMPLEMENTATION===CP " in include
"ZSAPLINK_ENH_IMPLEMENTATION===CM007 " in
line 35:
"Field "TOOLTYPE" is unknown. It is neither in one of the specified tab"
"les nor defined by a "DATA" statement. ."
----------------------
And then i install all the thinks in our SAP-IS-Utilities-system
with release 740. And i have no errors.
The different in the class CL_ENH_TOOL_HOOK_IMPL is:
740 has the attribute TOOLTYPE and 700 dont have the attribute TOOLTYPE.
So iam waiting for 740 in our system.
Thank you, Gregor and Stefan.
(Ticket can be closed.)
Thank you for your answer.
If i had the errormessage, i tested the statement
CLASS ZSAPLINK DEFINITION LOAD.
And i became another errormessage.
At your answer, i testet the statement once more and
i have no errormessage today.
So i install the SAPlink-plugins_Daily.nugg
with the program zsaplink and NOT with the zsaplink_installer.
It was not a good idea, i think.
There where errors.
At least i install the SAPlink-plugins_Daily.nugg
with the zsaplink_installer. There where errors too.
The result is a errormessage:
-----------------
The current ABAP program "ZSAPLINK======================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"ZSAPLINK_ENH_IMPLEMENTATION===CP " in include
"ZSAPLINK_ENH_IMPLEMENTATION===CM007 " in
line 35:
"Field "TOOLTYPE" is unknown. It is neither in one of the specified tab"
"les nor defined by a "DATA" statement. ."
----------------------
And then i install all the thinks in our SAP-IS-Utilities-system
with release 740. And i have no errors.
The different in the class CL_ENH_TOOL_HOOK_IMPL is:
740 has the attribute TOOLTYPE and 700 dont have the attribute TOOLTYPE.
So iam waiting for 740 in our system.
Thank you, Gregor and Stefan.
(Ticket can be closed.)
Fixed with revision 398